CUSTOM. BENDING. SOLUTION.

Immediately available machines

Placke is an owner-managed German manufacturer of Press brakes for sheet metal working. With our diverse product lines, we build robust, high-performance presses for customers who need to rely on precision and durability – developed and manufactured in our workshop in Melle.

Ready for transport to your production hall. For efficient, fast results.

EQPB 3 30t × 1.020mm

EQPB 3 30t × 1.020mm

Hydraulic excavator bending machine

Very fast, robust and low-noise, specifically designed for the production of small parts.
The EQPB is the smallest model of the Placke Press brakes.

Pressing force
30 t
Working length
1,020 mm
Position accuracy
± 0.01 mm
Quick passage
250 mm/s

Technical overview, single-cylinder Quality Press Brake,

Machine No.: P773

  • Stahl S 355 N, design based on FEM
  • Flexibly deformable welding structure, overfloor
  • 2-component structural paint, RAL 7004 / 7016
  • Proportional control valve control
  • Quiet internal gear pump
  • Roll guiding, Heidenhain scale
  • Top: WILA hydraulic, NSCL-II-HC
  • Below: narrow table, single V (13 × 20)
  • Y1-/Y2 correction, sitting or standing
  • X axis 950 mm, 800 mm/s, ± 0.01 mm
  • R-axis 215 mm, 150 mm/s, ± 0.01 mm
  • Z-axis manual, 2 stop fingers
  • 24″ touchscreen on the swivel arm
  • 2D programming, 3D visualization
  • DXF import, tandem operation
  • CE-compliant, Pilz safety SPS
  • TFS laser light barrier, for installation on the side
  • Eco-MODE Start-Stop Automatic
feature Specification
Pressing force300 kN (30 t)
Working length1,020 mm
Passage between the stands850 mm
Mounting height350 mm
Discharge255 mm
Piston lift3165 mm
Height of the lower part of the mound above the ground947 mm
Quick passage max.250 mm/s
feature Specification
Maximum number of employees.9.8 mm/s
Retirement max.160 mm/s
Positioning accuracy plunger± 0.01 mm
Engine power3.0 kW
Tank contents Hydraulic oil90 l
Operating voltage400 V / 3 Ph / 50 Hz
Machine weightabout 3.8 t

Technical changes are reserved.

EQPB 6 / 30t × 1.020 mm

Hydraulic excavator bending machine

The top model of the Placke series Press brakes. All production, Hydraulic cylinder from the switch cabinet construction to the final assembly, takes place in-house.

Pressing force
30 t
Working length
1,020 mm
Position accuracy
± 0.01 mm
4 axles
CNC back stop

Technical overview, single-cylinder Quality Press Brake,

Machine No.: P781

  • Stahl S 355 N, design based on FEM
  • Flexibly deformable welding structure, overfloor
  • 2-component structural paint, RAL 7004 / 7016
  • Proportional control valve control
  • Quiet internal gear pump
  • Roll guiding, Heidenhain scale
  • WILA pneumatic, top NSCL-II-SL-STL, bottom OB-II-SL-STL
  • Smart Tool Locator: LED display of the tool position
  • Y1-/Y2 correction, sitting or standing
  • X axis 950 mm, 800 mm/s, ± 0.01 mm
  • R-axis 215 mm, 150 mm/s, ± 0.01 mm
  • Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm
  • Fully automatic camera-laser system
  • Measures the external angle on the sheet metal
  • Two force sensors for back-rebound measurement
  • 24″ touchscreen on the swivel arm
  • 2D programming, 3D visualization
  • DXF import, tandem operation
  • Large Control cabinet, Modbus-interface press robot
  • Modular SPS PSS 4000
  • Strike finger with trigger recognition
  • CE-compliant, Pilz safety SPS
  • TFS laser light barrier, rear light curtain
  • Eco-MODE Start-Stop Automatic
feature Specification
Pressing force300 kN (30 t)
Working length1,020 mm
Passage between the stands850 mm
Mounting height350 mm
Discharge255 mm
Piston lift165 mm
Height of the lower part of the mound above the ground947 mm
Quick passage max.250 mm/s
feature Specification
Maximum number of employees.9.8 mm/s
Retirement max.160 mm/s
Positioning accuracy plunger± 0.01 mm
Engine power3.0 kW
Tank contents Hydraulic oil90 l
Operating voltage400 V / 3 Ph / 50 Hz
Machine weightabout 3.8 t

Technical changes are reserved.

HQPB 4 60t × 1.550mm

Hydraulic excavator bending machine

The top model of the Placke series Press brakes. All production, Hydraulic cylinder from the switch cabinet construction to the final assembly, takes place in-house.

Pressing force
60 t
Working length
1,550 mm
Position accuracy
± 0.01 mm
Quick passage
250 mm/s

Technical overview, High Quality Press Brake,

Machine No.: P786

  • Stahl S 355 N, design based on FEM
  • Side stand with two pressure tubes, over-the-top
  • 2-component structural paint, RAL 7004 / 7016
  • Proportional control valve control, electronically controlled cylinder alignment
  • Press beam heated with low stress, Heidenhain standards
  • Separate Y1-/Y2 control, slope run monitoring
  • Top: WILA hydraulic, NSCL-II-HC, fully hardened
  • Below: narrow table, single V (13 × 20)
  • Reinforced undergarments, no need for mechanical bombing
  • 2 aluminum flip-up arms in front, approx. 600 mm, with tilt connections
  • Swivels on ball swivel guide
  • Height adjustable for matrices from 55 to 100 mm
  • X axis 950 mm, 300 mm/s, ± 0.01 mm
  • R-axis 200 mm, 150 mm/s, ± 0.01 mm
  • Z-axis manually with quick clamping, 2 stop fingers
  • 24″ touchscreen on the swivel arm
  • 2D programming, 3D visualization
  • DXF import, tandem operation
  • CE-compliant, Pilz safety SPS
  • TFS laser light barrier, for installation on the side
  • Eco-MODE Start-Stop Automatic
  • Backstop with AC servo technology
  • Compensation of the side stand bracing and the temperature-induced expansion of the stand
  • Dynamic pressure control, LED workroom lighting
feature Specification
Pressing force600 kN (60 t)
Working length1,550 mm
Passage between the stands1,200 mm
Mounting height400 mm
Discharge255 mm
Piston lift215 mm
Height of the lower part of the mound above the ground947 mm
Quick passage max.250 mm/s
feature Specification
Maximum number of employees.9.8 mm/s
Retirement max.170 mm/s
Positioning accuracy plunger± 0.01 mm
Tilt position of the plunger± 10 mm
(limited to ± 5 mm electrically)
Engine power5.5 kW
Tank contents Hydraulic oil120 l
Operating voltage400 V / 3 Ph / 50 Hz
Machine weightabout 7 tons

Technical changes are reserved.

HQPB PCS-6 150t × 3.100mm

Hydraulic excavator with Power Crowning Slim.

The top model of the Placke series Press brakes. All production, Hydraulic cylinder from the switch cabinet construction to the final assembly, takes place in-house.

Pressing force
150 t
Working length
3,100 mm
Position accuracy
± 0.01 mm
4 axles
CNC back stop

Technical overview, High Quality Press Brake,

Machine No.: P790

  • Stahl S 355 N, design based on FEM
  • Side stand with two pressure tubes, over-the-top
  • 2-component structural paint, RAL 7004 / 7016
  • Proportional control valve control, electronically controlled cylinder alignment
  • Double Oberwangen control, Heidenhain standards
  • Separate Y1-/Y2 control, slope run monitoring
  • Top: WILA hydraulic, NSCL-II-HC
  • Below: mechanical clamping for matrices with pins (13 × 20 mm)
  • 2 aluminum shelves in front, approx. 600 mm, height-adjustable
  • Segmented, mechatronic bomb disposal system
  • Reduces symmetrical distortion
  • Compensates additionally for deviations caused by wear, sheet metal quality and insertion from the outside
  • X axis 1,100 mm, 400 mm/s, ± 0.01 mm
  • R-axis 200 mm, 200 mm/s, ± 0.01 mm
  • Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm
  • 24″ touchscreen on the swivel arm
  • 2D programming, 3D visualization
  • DXF import, tandem operation
  • CE-compliant, Pilz safety SPS
  • TFS laser light barrier, rear light curtain
  • Eco-MODE Start-Stop Automatic
  • LED workspace lighting rear
  • Remote diagnostics for Delem control and Pilz SPS
  • Automatic page stand loading compensation
feature Specification
Pressing force1,500 kN (150 t)
Working length3,100 mm
Passage between the stands2,600 mm
Mounting height450 mm
Discharge305 mm
Piston lift265 mm
Height of the lower part of the mound above the ground850 mm
Quick passage max.200 mm/s
feature Specification
Maximum number of employees.9.8 mm/s
Retirement max.150 mm/s
Positioning accuracy plunger± 0.01 mm
Tilt position of the plunger± 10 mm
(limited to ± 5 mm electrically)
Engine power15 kW
Tank contents Hydraulic oil290 l
Operating voltage400 V / 3 Ph / 50 Hz
Machine weightapprox. 12.5 t

Technical changes are reserved.

HQPB H-6 230t × 3.100mm

Hydraulic excavator with Power Crowning Slim.

The top model of the Placke series Press brakes. All production, Hydraulic cylinder from the switch cabinet construction to the final assembly, takes place in-house.

Pressing force
230 t
Working length
3,100 mm
Position accuracy
± 0.01 mm
4 axles
CNC back stop

Technical overview, High Quality Press Brake,

Machine No.: P784

  • Stahl S 355 N, design based on FEM
  • Side stand with two pressure tubes, over-the-top
  • 2-component structural paint, RAL 7004 / 7016
  • Proportional control valve control, electronically controlled cylinder alignment
  • Double Oberwangen control, Heidenhain standards
  • Separate Y1-/Y2 control, slope run monitoring
  • Top: WILA hydraulic, NSCL-II-HC
  • Below: narrow table, single V (13 × 20)
  • 2 aluminum shelves in front, approx. 600 mm, height-adjustable
  • Centrally adjustable, hydraulically dynamic, CNC-controlled
  • Active control circuit keeps the lower blades in zero position
  • Constant bending angle
  • X axis 1,100 mm, 400 mm/s, ± 0.01 mm
  • R-axis 200 mm, 200 mm/s, ± 0.01 mm
  • Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm
  • 24″ touchscreen on the swivel arm
  • 2D programming, 3D visualization
  • DXF import, tandem operation
  • CE-compliant, Pilz safety SPS
  • TFS laser light barrier, rear light curtain
  • Eco-MODE Start-Stop Automatic
  • Air conditioning in Control cabinet
  • LED workspace lighting rear
  • Remote diagnostics for Delem control and Pilz SPS
feature Specification
Pressing force2,300 kN (230 t)
Working length3,100 mm
Passage between the stands2,600 mm
Mounting height450 mm
Discharge305 mm
Piston lift265 mm
Height of the lower part of the mound above the ground850 mm
Quick passage max.200 mm/s
feature Specification
Maximum number of employees.9.8 mm/s
Retirement max.150 mm/s
Positioning accuracy plunger± 0.01 mm
Tilt position of the plunger± 10 mm
(limited to ± 5 mm electrically)
Engine power18.5 kW
Tank contents Hydraulic oil290 l
Operating voltage400 V / 3 Ph / 50 Hz
Machine weightapprox. 17.5 t

Technical changes are reserved.

Interested? Write to us.